Navigate to Floorplan
Open the GoCapture app
Log in with your Multivista account or tap Continue with SSO.
Select a project
Choose a project to open its floorplan dashboard.
Select a floorplan
Choose the floorplan for this capture session.
Capture Photo
Tap "Capture"
Tap Capture to see the available capture modes.
Tap "Photo"
Tap Photo to select the capture mode.
Set your capture location
Place yourself on the floorplan.
Tap and drag the crosshair to your exact position on the floorplan.
Pinch the floorplan to zoom in or out, or use the magnifying glass icon.
Tap Set Location when done.
⚠️ Use any visible reference point; doors, rooms, or windows to pinpoint your position accurately.
Allow access to your photo library
If you just installed or reinstalled the GoCapture app, a prompt will ask for permission to access your photo library.
Tap Allow Full Access to continue.
Locate your saved photo
Find the album or folder where you saved your pre-captured photo.
Select the photo or photos you want to place on the floorplan. When you're done, tap the check icon to continue.
📝 Once selected, a green marker will appear on the floorplan containing all the photos you chose from your library.
View your capture
Tap the close button to return to the floorplan and view your photo from the green marker.
📝 Photo quality depends on your device camera's specs.
Upload and review photo (Optional)
Upload
Photos upload automatically while the app is open and connected to the internet.
Review photo
After selecting your photos, a green marker will appear on the floorplan.
Tap a marker to view photo thumbnails, arranged from latest to earliest.
Tap a photo to open it in the 360 viewer. From there, you can delete it if needed.
⚠️ Deleted photos are removed from the marker permanently and cannot be undone.
